How Do I Move Stock From Bin Locations?

Select Bin and Stock Location Maintenance from the Stock menu.

Then  Stock Bin Locations.

Enter Bin Location where you wish to move stock from. i.e. A.

Select Next.

You will be displayed all the bins in the specific location which was entered.
In this case it is location A.

You will also be able to see  the StockCode and the Description of the item which is in the bin.
i.e. Stock Code 6244 is located in Primary Bin B-20-A and Secondary Bin A-20-A.

PrimaryBin is the overflow bin.

SecondaryBin is the bin in the aisle where you pick the stock.

Select Edit next to the bin you wish to change.

If you wish to change the location of the PrimaryBin, select Search next to the Primary Bin.

If you wish to change the location of the SecondaryBin, select Search next to the Secondary Bin.

You will be displayed with a long list of bins.

Select the bin you wish to transfer the stock to.

You will realize the figures on Primary or Secondary Bin will change once you have selected a different bin.

Select Update.

• Related Articles

• Add Bin Locations With Scanners

  Scanners You will need to use the Stocktake function on the scanner to complete this task. When you start a Stocktake it will ask you for the following information, Site Location Barcode, Bin Location Barcode. New Count Site Loc _ Scan/Key Site Locn ...

• How to add a Simple Bin Location

  This document will explain adding a simple bin location to the back office. Used for pallets and temporary locations for example. Note that in order to add a bin to a branch, the branch must first be checked as a warehouse: Go to Stock - Bin and ...

• Stock Adjustment

  Adjusting Stock The first Step is to go into the Stock Adjustment Program. This can be found under the stock menu. You will first need to set the base parameters to determine which branch you are updating, when you want the adjustment to take place ...

• How Do I Adjust Stock with Scanners?

  On the scanner, press number 6 on the Main Menu to select Adjustments. If the scanner displays “Adjustment In/Out for Branch Name In Progress†then select “No†and go to the "How to delete previous Stock Adjustments File" section towards the ...

• Delete Bin Location

  1. Select Stock 2. Select Bin and Stock Location Maintenance 3. Here select the Bin Locations option You'll see at the bottom right there is a 'delete selected' option. Note that you are only able to delete it once all stock has been removed.